Return to Table of Contents

CLIM8ZONE MODES

3 speed modes:

1 – Auto Smart (Default)

  • For heating or cooling.
  • Uses artificial intelligence.
  • Variable heating/cooling capacity.
  • The Clim8zoneTM computer automatically adjusts the compressor frequency up or down using an algorithm that is based on ambient air temperature and water temperature.
  • This algorithm balances a best case in most conditions for efficiency and noise vs heating/ cooling output of the Clim8zone unit.

2 – Manual High

  • For heating or cooling.
  • Highest heating capacity.
  • Fastest water heating/cooling.
  • Low COP (i.e. Low Energy Efficiency).
  • High compressor frequency – Fixed, i.e. does not adjust based on environmental conditions.

3 – Manual Low

  • For Heating or Cooling.
  • Lowest Heating/Cooling Capacity.
  • Slowest Water Heating.
  • High COP (i.e. High Energy Efficiency).
  • Low Compressor Frequency – Fixed, i.e. does not adjust based on environmental conditions.

4 Clim8zone modes:

1 – Heat and Cool

This mode heats and cools the spa water with the Clim8zone unit enabled.

2 – Heat Only

This mode only heats the spa water.
All cooling with the Clim8zoneTM unit is disabled.

3 – Cool Only

This mode only cools the spa water.
All heating on the spa is disabled.

4 – Disabled

The Clim8zoneTM unit is disabled.

4 Clim8zone modes:

Modes 1 – 3 are manually selectable.

1 – Continuous

The electric heater (eHeater) is continuously enabled.

2 – Auto

Auto mode activates the electric heater if the water temperature at the start of heating is at least 10 °F below the set temperature.

3 – Disabled

The electric heater is continuously disabled.

4 – Enabled

The electric heater is continuously enabled.
This setting is selected automatically when Clim8zone mode is set to “Disabled.”