Viewing: Electrical Heaters

» Return to 50Hz Bath Heaters

Electrical Heater

Enlarge   Share on Facebook   Share on Twitter  

Electrical Heater

1.5 kW Pressure Switch and Vacuum Switch Heaters 3.0 kW Vacuum Switch Heaters

Specifications: Electrical Heaters
20-5415P, 20-5415V, 20-54151V, 20-5430V, 20-54301V, 20-5430P

Voltage/Current 20-5415 (1)X
Nominal voltage: 240x50/60Hz
Nominal output: 1.5kW
Nominal Current: 6.3A

Voltage/Current 20-5430(1)X
Nominal voltage: 240, 50/60Hz
Nominal output: 3.0kW
Nominal Current: 12.5A 

Activation Pressure
20-54XX (pressure): 2,25 psi
20-54XX(1)V (vacuum): -0,8 psi
Minimum water flow rate: 9m3/h

Inline_Installation

Heater
Operating temperature: Higher than 0°C.
Overheating thermostat: Cutting-out at approx. 50°C.
Automatic reset after disconnection of power for 15 - 30 min.
Temperature control: Preset to 40°C, Automatic, not adjustable. 

Material
Outer tubes and heating element: stainless steel: SUS 304
Tailpiece: PVC
Union nut: ABS
Box with adjustable thermostat: Metal
Box with built-in thermostat: ABS 

Water Quality Requirements
Chloride: Max. 400 mg/l
Chlorine: Max. 2 mg/l
pH value: 7,0 - 7,8 

Dimensions
Length: 1,5kW: 25,5 cm. (incl. tailpiece). 3,0 kW: 33 cm (incl. tailpiece)
Max. height, built-in thermostat: 13,0 cm.
Max. height, adjustable thermostat: 13,7 cm. 

Downloads:
» Electrical Bath Heater Manual

This website is using cookies to create the most secure and effective website possible for our customers. By using our website you accept our use of cookies. Read our cookie policy.
I Agree